We offer the TYGRIS industrial range and PROTEAN Food Industry range of aerosols.

We have access to the entire range of Tygris products, even those you don't see on this page, so please enquire.

HELPLINE 01384 671505
EMAIL
sales@excalibur-hygiene.co.uk

PROTEAN Fast Dry Solvent Cleaner 12 x 400 ml aerosols

Tygris Protean
F400
5060253471120
(RRP £127.56)
kg
Add to cart
PROTEAN Fast Dry Solvent Cleaner 400 ml aerosol F400
PROTEAN Fast Dry Solvent Cleaner is a NSF: K1 registered non-chlorinated, residue-free cleaner.
F400 is powerful enough to dissolve away all types of contaminant in the workshop quickly leaving no residue and eliminating the need of rinsing.
  • NSF: K1 registered for use in non-food processing areas where there is no possibility of solvent vapours entering a processing area
  • Powerfully removes all types of contaminant
  • Fast drying
  • Leaves no residue
  • Does not contain chlorinated solvents
  • Temp. range: -20°C to +65°C
  • 360° valve for inverted use

PROTEAN Multi-Lube Spray 12 x 400 ml aerosols

Tygris Protean
F404
5060253471144
(RRP £154.20)
kg
Add to cart
Protean Multi-Purpose Lubricant F404
PROTEAN Multi-Purpose Lubricant F404 is a general purpose food grade lubricant for use in and around food processing areas, for the lubrication of cables, chains, castors, hinges, bearings and pins.
  • NSF: H1 registered (lubricant with incidental food contact - for use in and around food processing areas),
  • Effective over a wide temperature range.
  • Good water displacement.
  • Good penetration properties.
  • Effective corrosion resistance.
  • Temp. range: -20°C to +200°C.
  • 360° valve for inverted use.

PROTEAN Chain Spray 12 x 400 ml aerosols

Tygris Protean
F408
5060253471168
(RRP £133.68)
kg
Add to cart
Protean Chain Spray F408 400 ml aerosol
PROTEAN Chain Spray is a tenacious Anti-Fling Lubricant.
NSF: H1 registered food grade chain spray suitable for use within Food & Beverage, Packaging, Pharmaceutical and other cleanroom environments. 
  • PROTEAN Chain Spray is a non-toxic, anti-fling lubricant is designed to keep chain and drive systems operating smoothly.  
  • F408 Chain Spray is highly water resistant and ideal when used on food conveyor systems requiring frequent wash down.
  • H1 registered (lubricant with incidental food contact – for use in and around food processing areas)
  • Non-toxic
  • Highly tenacious: will not drip off and suitable for use on fast moving components
  • Contains effective anti-corrosion additives
  • Water resistant – withstands washing down
  • Temperature range: -20°C to +200°C
  • 360° valve for inverted use

PROTEAN Penetrating Oil Spray 12 x 400 ml aerosols

Tygris Protean
F412
5060253471182
(RRP £156.36)
kg
Add to cart
PROTEAN Penetrating and Release Fluid F412 400 ml aerosol
PROTEAN F412 is a Penetrating and Release Fluid in a case of 12 aerosols.
Actively penetrates seized components. Enriched with anti-corrosion additives, a residual lubricating film adheres to the released part, facilitating re-assembly and helping prevent further corrosion.
  • Effective over a wide temperature range, F412 is equipped with an all angle valve which promotes application in an inverted position. 
  • Suitable for use within Food & Beverage, Packaging, Pharmaceutical and other clean room environments.
  • NSF: H1 Registered (lubricant with incidental food contact for use in and around food processing areas)
  • Powerful penetration through rust - scale and grime
  • Performs over a wide temperature range
  • Leaves a corrosion resistant coating
  • Temp. range: -20°C to +250°C
  • 360° valve for inverted use

PROTEAN Silicone Release 12 x 400 ml aerosols

Tygris Protean
F418
5060253471212
(RRP £104.40)
kg
Add to cart
PROTEAN Silcone Release 400 ml aerosol F418

PROTEAN Silicone Release Spray F418 is an effective Lubricant & Release Agent
NSF: H1 registered lubricant and release agent developed for use in Food & Beverage processing areas.  Designed to protect and lubricate a wide range of parts and equipment, and for the release of injection moulded parts where traditional oils are not suitable.  

PROTEAN Silicone Release Spray is also suitable for use in Packaging, Pharmaceutical and other cleanroom environments.

  • NSF: H1 Registered (lubricant with incidental food contact for use in and around food processing areas)
  • Silicone based - an alternative to traditional oils
  • Colourless and odourless
  • Non-staining and non-tainting
  • Wide temperature range
  • Excellent release properties
  • Temp. range: -20°C to +200°C
  • 360° valve for inverted use

TYGRIS Break and Clutch Cleaner 12 x 400 ml aerosols

Tygris
R202
5060253470024
(RRP £70.80)
kg
Add to cart
Tygris Break and Clutch Cleaner aerosol R202
Tygris Brake and Clutch Cleaner R202 is a non-staining, fast evaporating cleaner for brakes and clutches.
Tygris R202 is used to remove oil, grease, dirt and dust from brakes and clutches, aiding in the elimination of brake squeal and clutch slip caused by glazing and contamination. Can be used on many other surfaces as a powerful cleaning agent.
  • Colourless - non-staining
  • Fast evaporating solvents
  • Effective against grease - brake fluid - brake and clutch dust
  • Can be used to remove tar spots from some surfaces
  • Eliminates brake squeal and clutch slip

TYGRIS Industrial Cleaner 12 x 400 ml aerosols

Tygris
R207
5060253470123
(RRP £70.80)
kg
Add to cart
TYGRIS Industrial Cleaner R207  400 ml aerosol
TYGRIS R207 is a fast drying  industrial solvent based cleaner which leaves no residue.
Used to break down grease, dirt, oil and other workshop contaminants quickly and easily without the need of subsequent rinsing, saving time and maintaining a clean environment.
  • Powerful solvent cleaning
  • Breaks down workshop contaminants quickly
  • Solvent evaporates quickly leaving a clean surface
  • Non-chlorinated
  • No need for rinsing - leaves no residue

TYGRIS Clear Penetrating Oil R212 12 x 400 ml aerosols

Tygris
R212
5060253470154
(RRP £75.80)
kg
Add to cart
TYGRIS Clear Penetrating Oil R212 400 ml aerosol
TYGRIS Clear Penetrating Oil is a clear lubricant for the release of seized and rusted components.
A low-viscosity oil based product used to aid the removal and freeing of seized nuts and bolts, hinges, locks, tools and fittings with a fast penetrating capillary action. Leaves a clear protective film to guard against further corrosion.
  • Low viscosity for maximum penetration.
  • Easy to apply and works quickly.
  • Leaves a protective film against corrosion.
  • Also suitable for light lubrication duties.
  • De-watering capability.

TYGRIS WD Anti Rust Agent R213 12 x 400 ml aerosols

Tygris
R213
5060253470161
(RRP £75.80)
kg
Add to cart
TYGRIS WD Anti Rust Agent R213 400 ml aerosol
TYGRIS WD Anti Rust Agent R213 displaces water, penetrates, lubricates and protects.
A high performance water displacement spray which actively drives out moisture, even from hard-to-reach areas, leaving a fine lubricating film which protects against corrosion. This film enables easy dismantling of equipment in future. Also an effective cleaner.
  • Silicone free.
  • Powerful water displacement properties.
  • Leaves a shield against further moisture ingress.
  • Leaves a protective film guarding against corrosion.
  • Good general lubrication for most components.
  • A rapid penetrant for seized fixings.

TYGRIS Cutting and Tapping Fluid R214 12 x 400 ml aerosols

Tygris
R214
5060253470178
(RRP 88.70)
Add to cart
TYGRIS Cutting and Tapping Fluid R214 400 ml aerosol
Cutting and Tapping Fluid R214 contains extreme pressure additives to reduce tool wear and improve machined finish.
A ready to use cutting and tapping fluid in aerosol, specially formulated to improve tool performance and extend tool life. Prevents pitting, galling and metal seizure and is suitable for use on hard to work metals including stainless steel, titanium, aluminium and tool steel.
  • For cutting and tapping - reaming and turning.
  • Extreme pressure additives for difficult materials.
  • High pressure foaming discharge to aid penetration.
  • Prolongs tool life and improves machined finish.
  • Reduces heat build up.
  • Suitable for use on all metals.
  • Incorporates corrosion inhibitors.

TYGRIS Silicone Lubricant R217 12 x 400 ml aerosols

Tygris
R217
5060253470208
kg
Add to cart
TYGRIS Silicone Lubricant R217 400 ml aerosol
Silicone Lubricant R217 is non staining with high temperature stability.
Provides clean, low odour, non-staining lubrication for many applications, especially plastic parts and seals. Non-toxic in character, making it suitable where incidental food contact may occur.
  • Excellent lubricating properties.
  • Non-staining and low odour.
  • Effective on plastic - metal - wood - vinyl - rubber and other surfaces.
  • Non-toxic for use where incidental food contact may occur.
  • Used for mould release in the plastics industry.
  • An effective surface polish.
  • Use on seals - slides - bearings - textile equipment etc.
  • High temperature stability up to 200°C.
  • Water repellent.

TYGRIS Chain & Wire Lubricant R220 12 x 400 ml aerosols

Tygris
R220
5060253476057
(RRP £83.04)
kg
Add to cart
TYGRIS Chain & Wire Lubricant R220 400 ml aerosol
Chain & Wire Lubricant R220 is an anti-fling lubricant reinforced with molybdenum disulphide.
Tygris R220 is a heavy duty lubricant containing extreme pressure additive molybdenum disulphide (MoS2) which helps prevent metal to metal contact, thus reducing wear.
  • Penetrates deeply into drive chains and wire ropes to give long lasting lubrication, preventing corrosion, wear, and chain elongation.
  • Gives outstanding performance under extreme load.
  • Use on chain blocks - drive chains - fork lift chains and wire ropes.
  • Excellent lubrication properties.
  • Resistant to flinging off.
  • Only a thin film is left on the surface for lubrication and corrosion prevention.
  • High resistance to water wash off.

TYGRIS White Grease with PTFE R223 12 x 400 ml aerosols

Tygris
R223
5060253470260
(RRP £83.88)
kg
Add to cart
TYGRIS White Grease with PTFE R223 400 ml aerosol
TYGRIS White Grease with PTFE R223 is a clean, water resistant calcium based grease reinforced with PTFE.
Premium quality aerosol grease for use in applications requiring good water resistance.
For use in anti-friction and plain bearing pumping equipment and in the lubrication of linkages, door latches, hinges, gears, springs, bearings, rubber components, rings, striker plates and sliding shackles.
  • High water resistance in marine use.
  • Prevents corrosion in humid conditions.
  • Prevention of seizure.
  • Good mechanical stability.
  • Wide temperature Range from -20°C to 110°C.
  • Reinforced with PTFE for improved slip properties.

TYGRIS Bright Zinc Galve Spray R224 12 x 400 ml aerosols

Tygris
R224
5060253475081
kg
Add to cart
TYGRIS Bright Zinc Galve Spray R224 400 ml aerosol
TYGRIS Bright Zinc Galve Spray R224 is a quick drying zinc protective coating.
A bright zinc and aluminium powder based spray used for the cosmetic finishing and protection of previously galvanised surfaces where the component has been cut or welded, thereby exposing metal to the air. Zinc is a sacrificial metal and will prevent oxidisation and corrosion.
Resins in the coating cause it to bond firmly to the substrate.
  • Zinc content assists in corrosion prevention.
  • Resistant to salt spray and weathering.
  • Excellent heat resistance.
  • Aluminium powder gives a brighter finish to help blend with existing coatings.
  • Can be used on previously coated surfaces.
  • High purity powders.
  • Excellent adhesion and quick drying.
  • 150°C continuous - 400°C intermittent.